The installation has do be done from a factory clean mode. If the TV is fresh from the supplier the TV can be installed directly. Otherwise, you have to do a factory reset before you install the TV.
¶ Mandatory Settings
These settings have to be configured for the TV to work correctly.
¶ Initial settings at power-on
- Power on the TV
- Current Local Set:
< Your region > - Easy Set Up: Standalone Only
¶ Settings in Samsung main-menu
- Remove the sound feedback:
Menu – System – General – Sound Feedback: OFF – Enter - To turn Eco-solution off
Menu –System-Eco Solution – “turn all options OFF.” - To disable ScreenSaver:
Menu – System – Auto Protection Time – OFF - To disable Anynet+
Menu – System- Anynet+ (HDMI-CEC) - OFF
¶ Settings in Samsung standalone menu
Enter the Samsung Standalone Menu:
- Press MUTE - 1 - 1- 9 - OK
- Select Menu OSD – Menu Display: OFF
- Press RETURN to get back to the Standalone Menu
Select Network – Network Setup – Network – Network settings
and select wanted type of connection, Wireless or Wired connection.
Wireless connection: Select SSID and enter password
Select Network Status to check if you are properly connected to Internet.
If needed, enter the correct IP settings
Close and press RETURN on remote until you get to the Standalone Menu
Enter the menu: Widget Solution – Widget Mode: ON
Select: Server URL Setting: http://setupmy.tv
Press Return on remote until you get to the Standalone Menu
Select Virtual Standby: ON
Press Return on remote until you get to the Standalone Menu, and power off the TV
Power On the TV again
Install TV using preferred method and follow instructions on TV
¶ Optional settings
These setting are not needed for the TVs to work with the system.
¶ LAN out configuration
if your TV supports LAN out it can be used to provide internet connection for streaming devices such as Apple TV or Google Chromecast
Enter the Samsung Standalone Menu:
- Press MUTE - 1 - 1- 9 - OK
- Select Network
- Select LAN Out - ON
- Select VLAN ID - ON
- Select Solution VLAN ID -
<VLAN ID for TV commnunication > - Select Device VLAN ID -
<VLAN ID for Screen sharing device >
¶ Installing native applications
Native applications are applications provided by Samsung or 3rd party vendors such as YouTube which can be installed on the TV and offered as an additional service to the guest.
Enter the Samsung Standalone Menu:
- Press MUTE - 1 - 1- 9 - OK
- Select Network
- Select SmartHub Setting
- Select Open SmartHub
- Select Setup Smart Hub
- Accept Terms and Conditions
- Select Open SmartHub again.
- Select App and Install it
This setting will be included in the clone-file during cloning.
¶ Factory reset
A factory reset must be done, if you have a TV configured on an earlier system, and you want re-configure the TV.
Enter the Samsung Standalone Menu:
- Press MUTE - 1 - 1- 9 - OK
- Select System - TV Reset - TV Reset
¶ Cloning
Cloning allows you to do all the configurations on one TV and use a clone file from this TV to configure all other TVs during the installation.
Use USB1 for cloning
¶ Creating a clone file
This is how you create a clone file:
Insert a USB-pen in USB1 of your screen
Enter the Samsung Standalone Menu:
- Press MUTE - 1 - 1- 9 - OK
- Select Cloning - Clone TV to USB
- INSTALL TV USING A CLONE FILE
This is how you install a TV using a clone file from a previously installed TV:
- Insert a USB-pen in USB1 of your screen
- Power On the TV:
- Current Local Set: Your region
- TV Installation Type: Factory Menu
- Enter the Samsung Standalone Menu:
- Press MUTE - 1 - 1- 9 - OK
- Select Cloning - Clone USB to TV
- Select Copy data from USB to TV Set: OK
- When completed, the TV will restart.
- Power-On TV again
Install TV using preferred method and follow instructions on TV
¶ Update TV-firmware from USB
¶ Ccreate a firmware update dongle
The TV firmware is provided in form of a zip-file. Unzip the TV firmware, and make sure that the unzipped folder is named T-MxxxxDEUCB.(1) The folder must be placed at the root of the USB-dongle.
The folder structure is normally like this:
/ (root-folder)
|__ T-MxxxxDEUCB/(1)
|__ info.txt
|__ image/
|__ upgrade.msd
(1) xxxx is model dependant.
¶ Updating the TV-firmware
After you have created a firmware update dongle, you can now update the firmware on the TV.
- Power-On the TV
- Insert the Firmware Update dongle in USB1 of the TV
- Enter the Samsung Standalone Menu:
- Press MUTE - 1 - 1- 9 - OK
- Select System - SW Update
- Select Yes on the question: ""Do you want to search?" when prompted by the TV
- Select Yes on the question: "Update from version xxxx to version yyyy" when prompted by the TV
The TV will now update the TV and reboot when the update is completed.
¶ REMOTE CONTROLS
¶ Uniguest S1 Remote
You must set the Otrum RC to the correct protocol and address.
- To set the protocol: Press RED button for at least 2 seconds and then 010 while
keep pressing the RED button. - To set the address: Press BLUE button for at least 2 seconds and then 01 while
keep pressing the BLUE button (address 1 is also the default setting in the remote
so its normally not needed to set this).
Click here for more details about remote control programming.